Product Introduction:
Raymond mill is widely used in barite, calcite, marble, limestone, dolomite, bentonite, kaolin, gypsum and other high-fine powder processing with Mohs hardness not greater than 9.3. This product is a relatively traditional and widely used mill at present.
Product Advantages:
After continuous structural optimization, the whole machine occupies a small area and is convenient for transportation, installation and production. The use of electrical automation control reduces the failure rate and makes the production more stable and efficient. Wear parts are made of highly wear-resistant materials to reduce wear and provide a longer service life. Adjustable and controllable fineness, adapt to a wider rangeWorking Principle:
The grinding principle is that the grinding roller is tightly rolled on the grinding ring under the action of centrifugal force, and the material is scooped up by the shovel and sent to the middle of the grinding roller and the grinding ring. Under the action, the powdered material is blown up and passed through the analyzer. The material that meets the requirements of fineness passes through the analyzer, and returns to the grinding cavity to continue grinding if it fails to meet the requirements.Product Parameters:
| Model | Max Feeding Size (mm) | Finished Granularity(mm) | Classified Capacity(ch) | Central Shaft Rotation (r/min) | RingInner Diameter (mm) | Rotor Diameter (mm) | HeightI of Roller and Ring(mm) | Main Engine Motor(kw) | Air Blower Motor(kw) | Analyzer Motor (kw) |
| 3R1410 | 5-8 | 0.125-0.044 | 1-10 | 280 | φ405 | φ140 | 100 | Y160M-6-7.5 | Y132S-4-5.5 | Y90L-6-2.2 |
| 3R2115 | 15 | 0.125-0.044 | 1-18 | 180 | Φ640 | Φ210 | 150 | Y200L--815 | Y132M-4-11 | Y112M-6-2.2 |
| 3R2615 | 20 | 0.125-0.044 | 2-15 | 170 | Φ780 | Φ260 | 150 | Y225S-8-18.5 | Y180M-4-15 | Y112M-6-22 |
| 3R2714 | 20 | 0.125-0.044 | 2-28 | 170 | Φ830 | Φ270 | 140 | Y255M-8-18.5 | Y180M-4-18.5 | Y112M-6-2.2 |
| 4R2714 | 15-25 | 0.125-0.044 | 3-30 | 170 | Φ830 | Φ270 | 140 | Y225M-8-22 | Y180M-4-18.5 | Y112M-6-2.2 |
| 3R3016 | 15-25 | 0.125-0.044 | 3-34 | 178 | Φ910 | Φ300 | 160 | Y225M-8-30 | Y180L-4-22 | Y132S-6-3 |
| 4R3016 | 15-25 | 0.125-0.044 | 3-36 | 178 | Φ910 | Φ300 | 160 | Y225M-8-30 | Y180L-4-22 | Y132S-6-3 |
| 4R3216 | 25 | 0.125-0.044 | 3-38 | 130 | Φ970 | Φ320 | 160 | Y225S-4-37 | Y220M-4-30 | YC1200-4A-5.5 |
| 5R4119 | 30 | 0.124-0.044 | 6-76 | 105 | Φ1280 | Φ410 | 190 | Y280S-4-75 | Y25M-4-55 | YC1200-4B-7.5 |
